Polyphone bug samples loop coarse

• Da 6 0

  Mensaje de Dan el …
  Hello,
  
  If you have one instrument zone, with some loop start/stop offset
  
  then you save the instrument in polyphone
  
  It transform this into the samples loop zone
  
  so it remove the generators #2 and #3
  
  but it does not remove the generators #45 and #50 (coarse values) !!!!!!!
• Mensaje de Dan el …
  Not sure if Davy is reading this bug, and if it has been corrected on the new beta ?
  I can't use Polyphone for now if it kill my SF2 collection changing the loop start/stop incorrectly
• 429 1

  Mensaje de Davy el …
  Hello I did the following:
  * open a soundfont
  * at the instrument level, add a different value in the 4 possible offsets (loop / sample start / end offset)
  * save the soundfont
  * close the soundfont
  * reopen the soundfont
  
  I got the same values as expected. Maybe you mentioned something else?
  
  Regards,
  Davy
• Da 6 0

  Mensaje de Dan el …
  mmm... the problem is if there is NOT loop informations in the samples themself
  When saving, you fill the loop information from the instrument zone to the sample zone
  but you don't remove the coase values of the instrument zone
  And as you know, they are OFFSETS, so the player need to addition the loop values of the sample zone + the info of the instrument zone
• 429 1

  Mensaje de Davy el …
  I cannot reproduce the bug. Here is what I did:
  
  * I created a new soundfont and added a sample with no loop inside,
  * I created an instrument with one division containing the sample,
  * 4 different values have been set in the offsets,
  * I saved, closed, reopened,
  * values are still correct and no loop at the sample level.
  
  Please describe the process for reproducing the bug, this is still not very clear.
  
  Regards,
  Davy
• Da 6 0

  Mensaje de Dan el …
  * create a new soundfont and add a sample. Uncheck "En Boucle" and set the loop point start and stop at 0
  * created an instrument with one division containing the sample,
  * add 2 different values for the loop offsets start and stop, exp 5000 and 10000
  * save
  
  Go to the sample screen, you will see "en boucle" back again, and values back from 0 to end of sample
• ZI 203 0

  Mensaje de ziyametedemircan el …
  I don't know if the loop point in the sample section is changing to 0-0 to 0-end):
  
  But:
  
  The settings you make in the Instrument section are not automatically reflected in the Sample section.
  If it was, we'd have a lot of problems.
  
  We can use the same sample with a different starting points and / or loop points on another instrument. (Yes I am using it that way)
  For example: for legato-play, tremolo-effect, etc.
  test-sf.sf2
• 429 1

  Mensaje de Davy el …
  Finally I understand the bug! The minimal steps to reproduce are:
  * set 0-0 for a sample loop, at the sample level,
  * save.
  
  The sample loop is now changed to 0-{sample length - 1} and there is a problem if, in an instrument using this sample, the sample loop end offset is based on the sample loop end at the sample level.
  
  I'll fix this, thanks
• Da 6 0

  Mensaje de Dan el …
  Good to hear you have found the problem !
  Yes, I have many SF2 with the samples loop positions at 0, and they are defined in the instrument level.
  And I had problem when saving such SF2 with Polyphone.
  Please drop a word here when it is corrected, so I will be notified
  Cheers
• 429 1

  Mensaje de Davy el … 1
  Fixed!
  
  This fix will be included in version 2.1. I'm still waiting for some bug reports and if everything is ok I'll release the version at the beginning of September.
• Da 6 0

  Mensaje de Dan el …
  Great

Inicia sesión o regístrate para participar en las discusiones.