Ad velocity Equalizer ( Lo-Pass ), how ?

• KR 18 0

  消息来自 Klaus Roethlisberger，发表于 …
  I read
  https://www.polyphone.io/o/forum/feature…le-equalization#1549
  Is this the procedure, or is there another one ?
  
  Thank you
• ZI 203 0

  消息来自 ziyametedemircan，发表于 …
  It should default to -2400 when nothing is set. (So it is one of the default modulators)
  For higher values, you can try the method in the topic in question.
  You can override it to make sure it will work with any software/synthesizer (by redefining the same modulator)
• KR 18 0

  消息来自 Klaus Roethlisberger，发表于 …
  Thank you !
  I'm on a Mac OSX 10.10.5 with Polyphone 1.8,
  and until now, I can't see a toolbar as described...
  Also the manual / pics don't seem to look alike...here
  How do I go on with Polyphone 1.8 ?
  Sorry for the 'newby' questions...
  Best regards
• 消息来自 Klaus Roethlisberger，发表于 …
  tried on another Mac with Polyphone 2.2, and it seems to work, but Sforzando doesn't reflect it...
• 消息来自 Klaus Roethlisberger，发表于 …
  Here with Polyphone 1.8 the virtual keybord in Polyphone 1.8 doesn't reflect the filter cutoff by velocity...
  ?
  Klaus
  Polyphone1dot8cutoffScreenShot2022-10-24at10.13.29.pdf
• 消息来自 Klaus Roethlisberger，发表于 …
  Polyphone 2.2 :
  Exported a 'working' Velocity > Cutoff filter SFZ as SFZ, reimported,
  and the Velocity > Cutoff filter was gone...
  Exported the 'working' Velocity > Cutoff filter SFZ as Sf2
  and reimported, and the Velocity > Cutoff filter was there and works...
  ?
  
  Best
  
  Klaus
• ZI 203 0

  消息来自 ziyametedemircan，发表于 …
  Klaus Roethlisberger 写于 … - 显示被引用的消息

  Here with Polyphone 1.8 the virtual keybord in Polyphone 1.8 doesn't reflect the filter cutoff by velocity...
  ?
  Klaus
  I think full support for modulators started with version 2.1.
• 消息来自 ziyametedemircan，发表于 … 1
  Klaus Roethlisberger 写于 … - 显示被引用的消息

  Polyphone 2.2 :
  Exported a 'working' Velocity > Cutoff filter SFZ as SFZ, reimported,
  and the Velocity > Cutoff filter was gone...
  Exported the 'working' Velocity > Cutoff filter SFZ as Sf2
  and reimported, and the Velocity > Cutoff filter was there and works...
  ?
  
  Best
  
  Klaus
  Some parameters (if not suitable for import or export) may be lost when importing and exporting between sf2 and sFz formats.
  Some filters in sFz cannot be imported into sf2.
  The cutoff Filter in sFz is imported only if set to lpf_2p.
  The sFz format is text based, you can check it with a text editor.
  The mod-env part in sf2 keeps many settings in one place, not all of them can be exported as sFz.
  Modulators cannot currently be exported as sFz.
• KR 18 0

  消息来自 Klaus Roethlisberger，发表于 …
  So it is best to use sf2 always ?
  BTW where do I set the cutoff filter to lpf_2p ?
  Klaus

登录或注册后即可参与讨论。