Root key of a voice

• 1 0

  消息来自 Ritthichai(Thai Name)，发表于 …
  May be this is old question.
  I am very new to DSPs.
  I wonder how to define the root key:
  if root key more than key range and otherwise.
  Suppose rootkey is 40 key range 40-52 compare with keyrange 28-40.
• 429 1

  消息来自 Davy，发表于 …
  Hello,
  
  If you are talking about the root key of a sample, this page will explain how to configure it. At the sample level, the goal is to determine the exact pitch of a sample.
  
  Once the sample is configured, you can then add it in an instrument and define a range, which is usually around the rootkey of the sample. With experience, I prefer using a keyrange 28-40 for a sample having a rootkey of 40 rather than using a keyrange 40-52. The reason is that when the sample is resampled to a higher pitch, high harmonics may be amplified and be annoying.
  
  Use the parameter "override rootkey" at the instrument level only if you want to transpose the sample in the instrument. For example, if you specify that the override rootkey is 52, the corresponding sample will sound with no resampling with the key 52. If the original rootkey was 40, you just transposed it an octave below. For a simple instrument you shouldn't have to use it.

登录或注册后即可参与讨论。